Divis DVR Manuel d'utilisateur télécharger pdf (Page 8)

www.Di

iSdvr.com

7 DiViS

Site List

Site Connection Mode

Single

Connect to a single DVR server system by selecting from the list of

already registered sites.

Once finished, exit out of the settings to Live View page.

Note that you cannot setup the site connection mode without registering

a site first. If you have not registered a site yet, go to Add Site below to

learn how.

Add Site

If you have not registered a site yet, there should only be “Add Site”

button under Site List. Otherwise, you should see a list of registered sites

below the “Add Site” button in chronological order.

1. Tap “Add Site” under Site List. You should now come to a page

similar to the one to the right.

2. Enter a Site Name – a sort of nickname you give to the new site

for identification..

3. Enter the IP Address of the DVR server system – you can find

this information by going to whatismyip.com

on your DVR server

system.

4. Enter the number of channels you want to access. (If you want channels, 1 to 4, simply enter 4)

5. Enter the default port number. (Default port numbers are explained on our website. They are the

ports used by the server system for transferring various data types. By default, the value you

need to enter is set to be 3000.)

6. Enter the username and password required for login on the DVR server system.

7. Tap Settings to save and return to Settings.

You MUST set up the site connection mode before you can view registered sites in Live View

display. Refer to section Site Connection Mode on the page 7 to learn how to set up site connection

mode.

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Divis DVR Manuel d'utilisateur Page 8